![](/Uploads/5bfb8ac2f03e7.jpg)
![Left](/Public/images/left.gif)
![Right](/Public/images/right.gif)
Introduction |
GDL series “Standard” dying loaders integrates plastic drying and loading into one unit, especially applicable to those large injection molding machine which are placed in height limited workshop. This combination offers a group of standard photosensor hoppers, which can be used to load dried materials. Besides, GAL-900G is available for choose to realize the two-stage loading function.
Features |
Standard configuration
◆Adopts proportional deviation display thermostat, which controls the temperature accurately.
◆Stainless steel hopper ensures no material contamination.
◆Hopper separated from its base, which ensures convenient cleaning.
◆Stainless tube suction box is a standard equipment.
◆GDL-300 and even smaller models below are equipped with standard base. GDL-400 and even bigger models above it are equipped with magnetic base.
◆For GHD-25-150, heater pipes are connected by aluminum.
◆Overheat tripping can automatically cut off power when drying temperature exceeds set deviation value.
◆Adopts heat-insulated blower to prolong blower lifespan.
Accessory option
◆Hot air recyclers is optional, featuring energy-saving, no exhaust of hot air and dust, and environmental protection.
◆Hot air recycler, blower inlet filter, air filter, cyclone dust collector, magnetic base, hopper magnet, Euro suction box as you options.
◆24-hour timer is available as option.
Specifications |
Model | Applicable Dryer Model | Applicable Loader Model | Applicable Hopper Receive Model | Hopper Receiver Capacity (L) | Conveying Capacity (kg/hr) | Dimensions (H*W*D) | Weight(kg) |
GDL-25 | GHD-25 | GAL-800G OR 700G | 1×GVH-6L | 6 | 300 | 1620×1000×640 |
95 |
GAL-900G | 1×GVH-6L 1×GMH-6L | 2×6 | 450 | ||||
GDL-50 | GHD-50 | GAL-800G OR 700G | 1×GVH-6L | 6 | 300 | 1750×1000×640 | 107 |
GAL-900G | 1×GVH-6L 1×GMH-6L | 2×6 | 450 | ||||
GDL-75 | GHD-75 | GAL-800G OR 700G | 1×GVH-6L | 6 | 300 | 1850×1000×640 |
115 |
GAL-900G | 1×GVH-6L 1×GMH-6L | 2×6 | 450 | ||||
GDL-100 | GHD-100 | GAL-800G OR 700G | 1×GVH-6L | 6 | 300 | 1950×1080×710 |
152 |
GAL-900G | 1×GVH-6L 1×GMH-6L | 2×6 | 450 | ||||
GDL-150 | GHD-150 | GAL-800G OR 700G | 1×GVH-6L | 6 | 300 | 2200×1080×710 |
157 |
GAL-900G | 1×GVH-6L 1×GMH-6L | 2×6 | 450 | ||||
GDL-200 | GHD-200 | GAL-800G | 1×GVH-6L | 6 | 300 | 2385×1140×840 |
207 |
GAL-900G | 1×GVH-6L 1×GMH-6L | 2×6 | 450 | ||||
GDL-300 | GHD-300 | GAL-800G | 1×GVH-6L | 6 | 300 | 2690×1140×840 |
217 |
GAL-900G | 1×GVH-6L 1×GMH-6L | 2×6 | 450 | ||||
GDL-400 | GHD-400 | GAL-800G | 1×GVH-6L | 6 | 300 | 2800×1240×1020 | 282 |
GAL-900G | 1×GVH-6L 1×GMH-6 | 2×6 | 450 |
Note:1)Install 24 hr timer, add “T” at the back of the model.
2)Additional note of “M” will be added to GHD-300 and below models, the bases of which are changed to be magnetic bases.